5 Tips To Keep Your Epoxy Floors Well Maintained

Do you use epoxy floor coatings for your home or industry space? There are some everyday maintenance and care procedures for the particular flooring system that you have to carry out according to our epoxy flooring San Diego experts.

It is critical to get it right, especially when it comes to maintaining epoxy floors. These are just some of the reasons why you must be keen in ensuring proper care for your epoxy floors.

Epoxy Flooring Maintenance Tips

maintaining epoxy floor is very important

Appearance

Considering the case of an industrial floor or a highly decorative floor system, the outlook of your floor is highly paramount. It must be understood that the appearance of your floor determines your environment, whether it is in the case of logos or special coatings.

Commercial and retail outlets of major companies depend a lot on the beauty and finesse that comes with floor systems, which will serve to boost their image.

Safety And Performance

Safety is a core aspect when it comes to the design of industrial and commercial floors. Features such as static control, water resistance, and slip resistance should be key when maintaining floors. It is very important to consider safety and the performance of your floor systems, when it comes to maintenance.

Durability And Life

Most floors require an occasional re-touch or coating, depending on the level of usage or traffic it holds. It is, therefore, a necessity that proper maintenance is done to ensure that the floor coating lasts for a long period.

You can choose to adopt simple, fast, and cost-efficient maintenance procedures to keep your floor looking clean and brand new for years to come. This will, in the long run, give you additional benefits, including reduced expenditures and saving more time.

Different floors need different cleaning techniques and maintenance protocols to maintain their life, appearance, and performance. Your floor coating installer can provide the specific methods and procedures for maintaining a particular floor system. However, some of the best practices, particularly epoxy floors, are included below.

1. Sweep Your Floors Daily

It is recommended that you use a mechanized sweeper, or a broom with soft bristles to clean the space, and prevent hazards at the same time. Sweeping will also ensure durability, so it is a simple way of maintaining epoxy floors.

2. Wash Your Floors Weekly

Apart from sweeping daily, you should also mop your epoxy floors every week, depending on traffic. If there’s a lot of people walking on it every day, you should mop at least once every other day.

Thoroughly mop all the areas, while paying closer attention to areas where there’s high traffic. You can use a mechanized floor scrubber with soft bristles to ensure it is completely clean.

3. Clean Spills Immediately

Spills should be cleaned as soon as they occur, as they could be hazardous and very slippery, as is the case with epoxy floors. It can also potentially damage the floor if the spilled substance is corrosive, such as acids and harsh solvents.

4. Keep Sharp Objects Away

While some good quality epoxy floors may have higher resistance to scratch and puncturing, it is still absolutely necessary that you take the proper steps to ensure it is not scratched at all.

Do not slide objects over it that may puncture the floor coating. Liquids can get into scratches and further damage the floor.

Keep the surfaces dirt and grit free as much as you can. This goes especially for the times when you are moving machinery or vehicles on and off the floor. Dirt and grit will embed or scratch your epoxy floor if you let them stay there.

In general, epoxy floors can take a lot of scratches before they start to show any damage. However, we recommend that you remove all sand or dirt on a regular basis. The most efficient way to do that is to use a shop vacuum with a soft brush attachment.

How often you vacuum depends on how much dirt and grit end up on your epoxy floor. When you need to move heavy machinery across your garage floor or heavy objects in your home, take extra precautions not to damage the floor surface and always try to ensure the floor surface is dust and grit free.

5. Treat Stains Appropriately

If you get good quality epoxy, it is highly unlikely that it will ever get stained, in comparison with other floor coverings. If your flooring is stained, take action as soon as you notice this, and treat it before it sets in.

Epoxy floors are highly water-resistant and very easy to clean when liquid spills occur. You do need to pick up any spilled liquid as soon as possible.

For very dirty spots, you need to avoid using soap-based cleaners. Soap-based floor cleaners leave a haze on the epoxy flooring which will build up over time. Epoxy floors do not need soap: warm water and a good mop or deck-scrubbing brush with soft bristles will do the job just fine.

If you need extra scrubbing power on very dirty areas, you can use something like very soft soap and well-diluted soapy solution to aid you with the tougher spills.

Here’s what will happen if you do not maintain your epoxy floor regularly and with due diligence:

Conclusion

The simple tips above are a guide on how to ensure the durability of your epoxy floors, enabling you to enjoy a beautiful, long-lasting floor.